# Overview

Civetweb is small and easy to use web server. It is self-contained, and does
not require any external software to run.

On Windows, civetweb iconifies itself to the system tray icon when started.
Right-click on the icon pops up a menu, where it is possible to stop
civetweb, or configure it, or install it as Windows service. The easiest way
to share a folder on Windows is to copy `civetweb.exe` to a folder,
double-click the exe, and launch a browser at
[http://localhost:8080](http://localhost:8080). Note that 'localhost' should
be changed to a machine's name if a folder is accessed from other computer.

On UNIX and Mac, civetweb is a command line utility. Running `civetweb` in
terminal, optionally followed by configuration parameters
(`civetweb [OPTIONS]`) or configuration file name
(`civetweb [config_file_name]`) starts the
web server. Civetweb does not detach from terminal. Pressing `Ctrl-C` keys
would stop the server.

When started, civetweb first searches for the configuration file.
If configuration file is specified explicitly in the command line, i.e.
`civetweb path_to_config_file`, then specified configuration file is used.
Otherwise, civetweb would search for file `civetweb.conf` in the same directory
where binary is located, and use it. Configuration file can be absent.


Configuration file is a sequence of lines, each line containing
command line argument name and it's value. Empty lines, and lines beginning
with `#`, are ignored. Here is the example of `civetweb.conf` file:

    document_root c:\www
    listening_ports 8080,8043s
    ssl_certificate c:\civetweb\ssl_cert.pem

When configuration file is processed, civetweb process command line arguments,
if they are specified. Command line arguments therefore can override
configuration file settings. Command line arguments must start with `-`.
For example, if `civetweb.conf` has line
`document_root /var/www`, and civetweb has been started as
`civetweb -document_root /etc`, then `/etc` directory will be served as
document root, because command line options take priority over
configuration file. Configuration options section below provide a good
overview of Civetweb features.

Note that configuration options on the command line must start with `-`,
but their names are the same as in the config file. All option names are
listed in the next section. Thus, the following two setups are equivalent:

    # Using command line arguments
    $ civetweb -listening_ports 1234 -document_root /var/www

    # Using config file
    $ cat civetweb.conf
    listening_ports 1234
    document_root /var/www
    $ civetweb

Civetweb can also be used to modify `.htpasswd` passwords file:

    civetweb -A <htpasswd_file> <realm> <user> <passwd>

Unlike other web servers, civetweb does not require CGI scripts be located in
a special directory. CGI scripts can be anywhere. CGI (and SSI) files are
recognized by the file name pattern. Civetweb uses shell-like glob
patterns. Pattern match starts at the beginning of the string, so essentially
patterns are prefix patterns. Syntax is as follows:

     **      Matches everything
     *       Matches everything but slash character, '/'
     ?       Matches any character
     $       Matches the end of the string
     |       Matches if pattern on the left side or the right side matches.

All other characters in the pattern match themselves. Examples:

    **.cgi$      Any string that ends with .cgi
    /foo         Any string that begins with /foo
    **a$|**b$    Any string that ends with a or b

# Configuration Options

Below is a list of configuration options Civetweb understands. Every option
is followed by it's default value. If default value is not present, then
it is empty.

### cgi_pattern `**.cgi$|**.pl$|**.php$`
All files that match `cgi_pattern` are treated as CGI files. Default pattern
allows CGI files be anywhere. To restrict CGIs to a certain directory,
use `/path/to/cgi-bin/**.cgi` as pattern. Note that full file path is
matched against the pattern, not the URI.

### cgi_environment
Extra environment variables to be passed to the CGI script in
addition to standard ones. The list must be comma-separated list
of name=value pairs, like this: `VARIABLE1=VALUE1,VARIABLE2=VALUE2`.

### put\_delete\_auth\_file
Passwords file for PUT and DELETE requests. Without it, PUT and DELETE requests
will fail.

### cgi_interpreter
Path to an executable to use as CGI interpreter for __all__ CGI scripts
regardless script extension. If this option is not set (which is a default),
Civetweb looks at first line of a CGI script,
[shebang line](http://en.wikipedia.org/wiki/Shebang_(Unix\)), for an interpreter.

For example, if both PHP and perl CGIs are used, then
`#!/path/to/php-cgi.exe` and `#!/path/to/perl.exe` must be first lines of the
respective CGI scripts. Note that paths should be either full file paths,
or file paths relative to the current working directory of civetweb server.
If civetweb is started by mouse double-click on Windows, current working
directory is a directory where civetweb executable is located.

If all CGIs use the same interpreter, for example they are all PHP, then
`cgi_interpreter` can be set to the path to `php-cgi.exe` executable and
shebang line in the CGI scripts can be omitted.
Note that PHP scripts must use `php-cgi.exe` executable, not `php.exe`.

### protect_uri
Comma separated list of URI=PATH pairs, specifying that given
URIs must be protected with respected password files. Paths must be full
file paths.

### authentication_domain `mydomain.com`
Authorization realm used in `.htpasswd` authorization.

### ssi_pattern `**.shtml$|**.shtm$`
All files that match `ssi_pattern` are treated as SSI.

Server Side Includes (SSI) is a simple interpreted server-side scripting
language which is most commonly used to include the contents of a file into
a web page. It can be useful when it is desirable to include a common piece
of code throughout a website, for example, headers and footers.

In order for a webpage to recognize an SSI-enabled HTML file, the filename
should end with a special extension, by default the extension should be
either `.shtml` or `.shtm`.

Unknown SSI directives are silently ignored by civetweb. Currently, two SSI
directives are supported, `<!--#include ...>` and
`<!--#exec "command">`. Note that `<!--#include ...>` directive supports
three path specifications:

    <!--#include virtual="path">  Path is relative to web server root
    <!--#include abspath="path">  Path is absolute or relative to
                                  web server working dir
    <!--#include file="path">,    Path is relative to current document
    <!--#include "path">

The `include` directive may be used to include the contents of a file or the
result of running a CGI script. The `exec` directive is used to execute a
command on a server, and show command's output. Example:

    <!--#exec "ls -l" -->

For more information on Server Side Includes, take a look at the Wikipedia:
[Server Side Includes](http://en.wikipedia.org/wiki/Server_Side_Includes)

### throttle
Limit download speed for clients.  `throttle` is a comma-separated
list of key=value pairs, where key could be:

    *                   limit speed for all connections
    x.x.x.x/mask        limit speed for specified subnet
    uri_prefix_pattern  limit speed for given URIs

The value is a floating-point number of bytes per second, optionally
followed by a `k` or `m` character, meaning kilobytes and
megabytes respectively. A limit of 0 means unlimited rate. The
last matching rule wins. Examples:

    *=1k,10.0.0.0/8=0   limit all accesses to 1 kilobyte per second,
                        but give connections from 10.0.0.0/8 subnet
                        unlimited speed

    /downloads/=5k      limit accesses to all URIs in `/downloads/` to
                        5 kilobytes per secods. All other accesses are unlimited

### access\_log\_file
Path to a file for access logs. Either full path, or relative to current
working directory. If absent (default), then accesses are not logged.

### error\_log\_file
Path to a file for error logs. Either full path, or relative to current
working directory. If absent (default), then errors are not logged.

### enable\_directory\_listing `yes`
Enable directory listing, either `yes` or `no`.

### enable\_keep\_alive `no`
Enable connection keep alive, either `yes` or `no`.

Experimental feature. Allows clients to reuse TCP connection for
subsequent HTTP requests, which improves performance.
For this to work when using request handlers it's important to add the correct
Content-Length HTTP header for each request. If this is forgotten the client
will time out.


### global\_auth\_file
Path to a global passwords file, either full path or relative to the current
working directory. If set, per-directory `.htpasswd` files are ignored,
and all requests are authorised against that file.

The file has to include the realm set through `authentication_domain` and the password in digest format:

    user:realm:digest
    test:test.com:ce0220efc2dd2fad6185e1f1af5a4327

(e.g. use [this generator](http://www.askapache.com/online-tools/htpasswd-generator))

### index_files `index.html,index.htm,index.cgi,index.shtml,index.php`
Comma-separated list of files to be treated as directory index
files.

### access\_control\_list
An Access Control List (ACL) allows restrictions to be put on the list of IP
addresses which have access to the web server. In the case of the Civetweb
web server, the ACL is a comma separated list of IP subnets, where each
subnet is prepended by either a `-` or a `+` sign. A plus sign means allow,
where a minus sign means deny. If a subnet mask is omitted, such as `-1.2.3.4`,
this means to deny only that single IP address.

Subnet masks may vary from 0 to 32, inclusive. The default setting is to allow
all accesses. On each request the full list is traversed, and
the last match wins. Examples:

    -0.0.0.0/0,+192.168/16    deny all acccesses, only allow 192.168/16 subnet

To learn more about subnet masks, see the
[Wikipedia page on Subnetwork](http://en.wikipedia.org/wiki/Subnetwork)

### extra\_mime\_types
Extra mime types to recognize, in form `extension1=type1,exten-
sion2=type2,...`. Extension must include dot.  Example:
`.cpp=plain/text,.java=plain/text`

### listening_ports `8080`
Comma-separated list of ports to listen on. If the port is SSL, a
letter `s` must be appeneded, for example, `80,443s` will open
port 80 and port 443, and connections on port 443 will be SSL-ed.
For non-SSL ports, it is allowed to append letter `r`, meaning 'redirect'.
Redirect ports will redirect all their traffic to the first configured
SSL port. For example, if `listening_ports` is `80r,443s`, then all
HTTP traffic coming at port 80 will be redirected to HTTPS port 443.

It is possible to specify an IP address to bind to. In this case,
an IP address and a colon must be prepended to the port number.
For example, to bind to a loopback interface on port 80 and to
all interfaces on HTTPS port 443, use `127.0.0.1:80,443s`.

### document_root `.`
A directory to serve. By default, currect directory is served. Current
directory is commonly referenced as dot (`.`).

### ssl_certificate
Path to SSL certificate file. This option is only required when at least one
of the `listening_ports` is SSL. The file must be in PEM format,
and it must have both private key and certificate, see for example
[ssl_cert.pem](https://github.com/sunsetbrew/civetweb/blob/master/resources/ssl_cert.pem)

### num_threads `50`
Number of worker threads. Civetweb handles each incoming connection in a
separate thread. Therefore, the value of this option is effectively a number
of concurrent HTTP connections Civetweb can handle.

### run\_as\_user
Switch to given user credentials after startup. Usually, this option is
required when civetweb needs to bind on privileged port on UNIX. To do
that, civetweb needs to be started as root. But running as root is a bad idea,
therefore this option can be used to drop privileges. Example:

    civetweb -listening_ports 80 -run_as_user nobody

### request\_timeout\_ms `30000`
Timeout for network read and network write operations, in milliseconds.
If client intends to keep long-running connection, either increase this value
or use keep-alive messages.


### url\_rewrite\_patterns
Comma-separated list of URL rewrites in the form of
`uri_pattern=file_or_directory_path`. When Civetweb receives the request,
it constructs the file name to show by combining `document_root` and the URI.
However, if the rewrite option is used and `uri_pattern` matches the
requested URI, then `document_root` is ignored. Insted,
`file_or_directory_path` is used, which should be a full path name or
a path relative to the web server's current working directory. Note that
`uri_pattern`, as all civetweb patterns, is a prefix pattern.

This makes it possible to serve many directories outside from `document_root`,
redirect all requests to scripts, and do other tricky things. For example,
to redirect all accesses to `.doc` files to a special script, do:

    civetweb -url_rewrite_patterns **.doc$=/path/to/cgi-bin/handle_doc.cgi

Or, to imitate user home directories support, do:

    civetweb -url_rewrite_patterns /~joe/=/home/joe/,/~bill=/home/bill/

### hide\_files\_patterns
A pattern for the files to hide. Files that match the pattern will not
show up in directory listing and return `404 Not Found` if requested. Pattern
must be for a file name only, not including directory name. Example:

    civetweb -hide_files_patterns secret.txt|even_more_secret.txt

# Lua Server Pages
Pre-built Windows and Mac civetweb binaries have built-in Lua Server Pages
support. That means it is possible to write PHP-like scripts with civetweb,
using Lua programming language instead of PHP. Lua is known
for it's speed and small size. Civetweb uses Lua version 5.2.2, the
documentation for it can be found at
[Lua 5.2 reference manual](http://www.lua.org/manual/5.2/).

To create a Lua Page, make sure a file has `.lp` extension. For example,
let's say it is going to be `my_page.lp`. The contents of the file, just like
with PHP, is HTML with embedded Lua code. Lua code must be enclosed in
`<?  ?>` blocks, and can appear anywhere on the page. For example, to
print current weekday name, one can write:

    <p>
      <span>Today is:</span>
      <? mg.write(os.date("%A")) ?>
    </p>

Note that this example uses function `mg.write()`, which prints data to the
web page. Using function `mg.write()` is the way to generate web content from
inside Lua code. In addition to `mg.write()`, all standard library functions
are accessible from the Lua code (please check reference manual for details),
and also information about the request is available in `mg.request_info` object,
like request method, all headers, etcetera. Please refer to
`struct mg_request_info` definition in
[civetweb.h](https://github.com/sunsetbrew/civetweb/blob/master/include/civetweb.h)
to see what kind of information is present in `mg.request_info` object. Also,
[page.lp](https://github.com/sunsetbrew/civetweb/blob/master/test/page.lp) and
[prime_numbers.lp](https://github.com/sunsetbrew/civetweb/blob/master/examples/docroot/prime_numbers.lp)
contains some example code that uses `request_info` and other functions(form submitting for example).

Civetweb exports the following to the Lua server page:

    mg.read()         -- reads a chunk from POST data, returns it as a string
    mg.write(str)     -- writes string to the client
    mg.include(path)  -- sources another Lua file
    mg.redirect(uri)  -- internal redirect to a given URI
    mg.onerror(msg)   -- error handler, can be overridden
    mg.version        -- a string that holds Civetweb version
    mg.request_info   -- a table with request information

    -- Connect to the remote TCP server. This function is an implementation
    -- of simple socket interface. It returns a socket object with three
    -- methods: send, recv, close, which are synchronous (blocking).
    -- connect() throws an exception on connection error.
    connect(host, port, use_ssl)

    -- Example of using connect() interface:
    local host = 'code.google.com'  -- IP address or domain name
    local ok, sock = pcall(connect, host, 80, 1)
    if ok then
      sock:send('GET /p/civetweb/ HTTP/1.0\r\n' ..
                'Host: ' .. host .. '\r\n\r\n')
      local reply = sock:recv()
      sock:close()
      -- reply now contains the web page https://code.google.com/p/civetweb
    end


**IMPORTANT: Civetweb does not send HTTP headers for Lua pages. Therefore,
every Lua Page must begin with HTTP reply line and headers**, like this:

    <? print('HTTP/1.0 200 OK\r\nContent-Type: text/html\r\n\r\n') ?>
    <html><body>
      ... the rest of the web page ...

To serve Lua Page, civetweb creates Lua context. That context is used for
all Lua blocks within the page. That means, all Lua blocks on the same page
share the same context. If one block defines a variable, for example, that
variable is visible in the block that follows.

# Common Problems
- PHP doesn't work - getting empty page, or 'File not found' error. The
  reason for that is wrong paths to the interpreter. Remember that with PHP,
  correct interpreter is `php-cgi.exe` (`php-cgi` on UNIX). Solution: specify
  full path to the PHP interpreter, e.g.:
    `civetweb -cgi_interpreter /full/path/to/php-cgi`

- Civetweb fails to start. If Civetweb exits immediately when run, this
  usually indicates a syntax error in the configuration file
  (named `civetweb.conf` by default) or the command-line arguments.
  Syntax checking is omitted from Civetweb to keep its size low. However,
  the Manual should be of help. Note: the syntax changes from time to time,
  so updating the config file might be necessary after executable update.

- Embedding with OpenSSL on Windows might fail because of calling convention.
  To force Civetweb to use `__stdcall` convention, add `/Gz` compilation
  flag in Visual Studio compiler.

